Tile Adhesive

Product Details:

HIGH STRENGTH FLEXIBLE ADHESIVE FOR EXTERNAL TILES & STONES AT ANY HEIGHT

For fixing large format tiles and natural stones on interior or exterior surfaces, also for areas subject to vibrations.

APPLICATION AREA

 

• For external / internal walls & floors
• Suitable for areas prone to vibration
• Any size of tiles & stones

Additional Information:

• Delivery Time: Ready Stock

Product Details:

HIGH STRENGTH FLEXIBLE ADHESIVE FOR EXTERNAL TILES & STONES AT ANY HEIGHT

For fixing large format tiles and natural stones on interior or exterior surfaces, also for areas subject to vibrations.

APPLICATION AREA

 

• For external / internal walls & floors
• Suitable for areas prone to vibration
• Any size of tiles & stones

Additional Information:

• Delivery Time: Ready Stock

Product Details:

FOR EXTERNAL TILES & NATURAL STONES

For all types of tiles, natural stones, and glass mosaic on internal and external floors and walls.

APPLICATION AREA

 

• For external floor & walls
• For all types of tiles & natural stones
* Recommended Roff Powerflex Adhesive for size > 2ft x 2ft and > 10ft height.

Product Details:

FOR EXTERNAL TILES & NATURAL STONES

For all types of tiles, natural stones, and glass mosaic on internal and external floors and walls.

APPLICATION AREA

 

• For external floor & walls
• For all types of tiles & natural stones
* Recommended Roff Powerflex Adhesive for size > 2ft x 2ft and > 10ft height.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

FOR CERAMIC TILES & NEW FLOOR TILES

Ideal for indoor application to fix high-porosity tiles like ceramic, terracota, and quarry tiles of regular size on walls and floors.

Additional Information:

• Delivery Time: Ready stock for dispatch

Product Details:

FOR INTERNAL VITRIFIED TILE & NATURAL STONES

For vitrified tiles, natural stones and glass mosaic tiles of all types and sizes. Ideal for internal floors and walls, and external floors only.

APPLICATION AREA

 

• For internal floor / wall & external floor
• Any size of tile & stone

Additional Information:

• Delivery Time: Ready For Dispatch

Product Details:

FOR INTERNAL VITRIFIED TILE & NATURAL STONES

For vitrified tiles, natural stones and glass mosaic tiles of all types and sizes. Ideal for internal floors and walls, and external floors only.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Polymer modified tile adhesive for fixing all types of tiles on floor, wall & tile-on-tile application.

FOR VITRIFIED TILES, NATURAL STONES & TILE-ON-TILE APPLICATION

To fix vitrified tiles and natural stones of small size on floors and walls, and to fix new tile on old tile. Ideal for indoor application only.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

APPLICATION AREA

• For tile-on-tile application
• For internal floor & wall
• For vitrified tiles & natural stones of small size

FOR VITRIFIED TILES, NATURAL STONES & TILE-ON-TILE APPLICATION

To fix vitrified tiles and natural stones of small size on floors and walls, and to fix new tile on old tile. Ideal for indoor application only.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Product Details
weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• Ready to mix
• Self curing
• Easy to use
• High compressive strength
• Good coverage
• Tile on tile application
• High bond strength
• Single component product

To know before applying

• Gradually add  3 parts of weberset classic (powder) to 1 part of clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer /low-speed drill mix / or any other appropriate tool.
•  After mixing, allow the mixture to stand for 2 min for it to mature.

Features and benefits

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.

Constraints

• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

Product Details:

The multipurpose high polymer, flexible modified thin-set mortar for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and brick. LATICRETE® 335 Super Flex Multipurpose Floor & Wall Tile Adhesive is designed to mix with water, has a convenient open time with high adhesion and workability.

Features & Benefits

 

• For fixing tiles & stone on demanding external & internal applications
• Polymer modified super flexible adhesive with superior bond strength
• High performance in all types of weather
• Single component - Just add water

Coverage Approx 55 – 60 sft per 20kg bag with (6mmx6mm) Square notched trowel for a bed of 3 mm. Color Grey & White

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: 20 kg & 50 kg HDPE Bag

Product Details:

A factory-made bagged cementitious polymer based powder, containing Portland cement
and silica sand, it can be mixed with water for installing small and medium size ceramic floor
tiles in interior areas using the thinset method of installation.

Features & Benefits

 

• For fixing cermic tiles on interior floor & wall
• Ideal for new floor tiling
• Economical & easy to use
• Single component - Just add water

Coverage Approx. 55-60 sq. ft. per 20 kg bag with a ¼” x ¼” (6mmx6mm) square notch trowel for a bed of 3mm. Color Grey Certification

• ANSI : Meets ANSI A 118.1 T
• EN 12004/ISO 13007: C1T
• IS 15477:2019 TYPE 1  T ADHESIVE
• VOC: Practically Nil

How to apply

 

Substrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:

• If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
• Dampen the wall before application of thin set adhesive
• Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATAFIX® 305 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need. Proportion: Approximately 1 bag of LATAFIX® 305 with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency. Installation:

• Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
• Additional mortar is then applied with the notched edge of the trowel.
• When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.

a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

• The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.

• Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
• Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: 20 kg & 50 kg PP Bag

Product Details:

JKCement TileMaxX 211 Anti-Skid Grey Adhesive is an advanced polymer enriched  cement based tile adhesive, suitable for application of ceramic tiles and natural stones for interior floors, interior walls up to 3 meters and vitrified tiles for interior floor applications. It is also suitable for tile on tile application. This product is recommended for various concrete and cement-based substrates.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: 20 KG BAG

Product Details:

JKCement TileMaxX 222 Universal Grey Adhesive is a grey cement based thin set tile adhesive with enhanced high-bond polymers. It is suitable for fixing all types of ceramic, semi vitreous, vitrified tiles and natural stones on a variety of substrates. It is applicable for both horizontal and vertical applications in interior and horizontal in exteriors.
Royale Ceramics is an authorised distributor for JK Tile Adhesives

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: 20 kg PP bag

Product Details:

A factory-made bagged cementitious polymer based powder, containing Portland cement
and silica sand, it can be mixed with water for installing small and medium size ceramic floor
tiles in interior areas using the thinset method of installation.

Features & Benefits

 

• For fixing cermic tiles on interior floor & wall
• Ideal for new floor tiling
• Economical & easy to use
• Single component - Just add water

Coverage Approx. 55-60 sq. ft. per 20 kg bag with a ¼” x ¼” (6mmx6mm) square notch trowel for a bed of 3mm. Color Grey

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: 20 kg & 50 kg HDPE Bags

Product Details:

LATICRETE® 307 floor and wall tile adhesive is a smooth and creamy thin-set Adhesive for installing small to medium format ceramic wall and floor tiles in interior areas. For improved performance and exterior use, fortify with LATICRETE® 73 Crete Admix.
Features & Benefits

 

• For fixing ceramic tiles on interior floor & wall
• Ideal for new floor tiling
• Smooth & Creamy
• Single component - Just add water

Coverage Approx. 55-60 sq.ft. per 20 kg bag with a ¼” x ¼” (6mm x 6mm) square notch trowel for a bed of 3mm. Color Grey & white

How to apply

 

Substrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:

• If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
• Dampen the wall before application of thin set adhesive
• Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 307 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for an immediate need. Proportion: Approximately 1 bag of LATICRETE® 307 with 5-6 ltrs of water. Adjust the quantity of liquid to obtain proper consistency. Installation:

• Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
• Additional mortar is then applied with the notched edge of the trowel.
• When installing large tiles, spread adhesive onto the back of tile in addition to trowelling material over a surface to be tiled. Select proper type of notched trowel.

a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

• The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
• Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
• Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.

Additional Information:

• Delivery Time: ready stock

Product Details:

JK Cement tilemax 111 for wall and floor tile adhesive is a polymer modified high strength grey cement based tile adhesive. Suitable for application of ceramic tiles on walls and floors. It is also suitable for application of vitrified tiles on floors.

Benefits:

Quick and Ready to Use
Just need to add water to form a smooth ready to use mix

Better Workability
Easy to place and work without segregation

Suitable for Ceramic and Vitrified Tiles
High sag resistance makes it suitable for ceramic and vitrified tile

 

Features:

Superior Adhesion
Excellent adhesion properties on horizontal and vertical application

Higher Coverage
Formulated with high performance additives for higher coverage with all cement substrates

No Curing Required
Self-curing property enables faster application

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: 20 KG PP BAG

Product Details:

A multipurpose, high polymer modified powder offering vast utility including applications
for floor & wall in interior & exterior areas. It is a cementitious thin-set powder to be mixed
only with water to install various types of medium & large format tiles & stone on a variety of
substrates.

Features & Benefits

 

• For fixing tiles & natural stone on interior & exterior floor & wall
• Polymer modified | Bonds with various substrates
• Water & shock resistant
• Single component - Just add water

Coverage: Approx. 55-60 sq.ft. per 20 kg bag with a 1/4” x 1/4” (6mm x 6mm) square notch trowel for a bed of 3mm. Color: Grey & White How to apply

 

Substrate: The surface to be covered with tile/ stone shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:

• If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
• Dampen the wall before application of thin set adhesive
• Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 325 High Flex and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need. Proportion: Approximately 1 bag of LATICRETE® 325 High Flex with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency. Installation:

• Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
• Additional mortar is then applied with the notched edge of the trowel.
• When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.

a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

• The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
• Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
• Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.

Additional Information:

• Delivery Time: READY FOR DISPATCH
• Packaging Details: 5 KG, 20 KG, 50 KG BAGS

Product Details:

UltraTech TILEFIXO-NT is a polymer modified cement based high performance, high strength, and high quality tile adhesive developed to fix large size tiles/slabs of granite, marble, stones. Suitable for both internal and external, thin bed applications. Technical Parameters complies with IS 15477, EN 1348.

Additional Information:

• Delivery Time: ready

Product Details:

weberset glass mosaic is a flexible, cement-based polymer modified tile adhesive for internal and external use, especially for Glass Mosaic. It is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in dry or wet areas, including swimming pools.
It is particularly suited for areas with some movement, deflection or limited shrinkage is likely. It has the finest particle size which makes it easily workable enhancing the colours of the glass mosaic tiles. weberset glass mosaic has extended open and adjustability times making installation easier with no sagging or slippage. Being a high strength, flexible tile adhesive, it can be used for heavy-duty applications on a variety of substrates.
To know before applying

• Gradually add 2.5 parts of powder to 1 part of clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer or a low-speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

Features and benefits

• Brightest white adhesive enhances the colour of glass mosaic.
• Free-flowing powder, having the long open time & prolonged workability when mixed as a paste makes it easy to install.
• No hacking required-having a high bonding strength it can be used to fix tile & stone on various substrates.
• Being self-curing it optimizes the usage of water and labour at the site.
• Being water resistant it can be used to fix various types of tiles including glass mosaics in swimming pools & other wet areas like showers, bathroom etc.
• It can sustain heat ageing.
• It has no shrinkage and is particularly suited for situations where some movement, deflection or limited shrinkage is likely.
• Absorbs dynamic loads which make it suitable to use in swimming pools where the water pressure or load may vary in a filled swimming pool and an empty swimming pool.
• Quick setting times which helps in faster construction.
• Can be used at depths up to 10 meters underwater which makes it particularly suitable for swimming pools.

ConstraintsNot to be used on:

• on wood or wooden conglomerates
• on metal, rubber, plastics, vinyl or linoleum surfaces
• for ceramic and vitrified tile installations when an adhesive layer thicker than 10 mm is required
• on the concrete subject to strong delayed movement, that is, with less than 6 months curing time.
• on the cementitious substrate which is not properly cured.
• on surfaces subject to vibrations.
• on plasterboard and fiberboards  

Product Details:

Product Details
UltraTech Tilefixo CT is an Economical Grade Tile Laying Mortar Recommended for Ceramic Tiles and Normal Vitrified Porcelain Tile, Tile-on-mosaic, Tile-on-cement Floors.
Suitable for Walls and Floors for Interior Floor application and not for External wall Cladding.
It Can be Used Cementitious Substrates only. It is not a Finishing or Mastic Application Products.

• Ready to Use
• Excellent Bond & Strength
• High Quality
• Save Time & Labour

Directions for use ( water/ powder Ratio: 25% )

• Clean the Surface Free from Oil etc...
• water Powder Ratio 25% by Weight
• Add 25 KGs Mortar in the water
• Mix Thoroughly  for 2-3 Minutes
• Wait for 5 Minutes
• Apply Mortar and Comb the Surface
• Place the Tiles on the Surface
• Tap the Tiles Gently using Wooden Block or Rubber
• Remove the Excess Mortar using Cloth/Sponge
• Wait for 24 Hours

Product Details:

UltraTech TILEFIXO-YT is a polymer modified white cement based high performance, high strength, and high quality tile adhesive developed to fix glass mosaic, Italian marble, marble and special tiles. Suitable for both internal and external, thin bed applications.

Product Details:

Product Details weberset plus-white is a ready to mix, highly polymer modified cementitious adhesive for vitrified, ceramic tile and natural stones of regular size on wall and floor with regular traffic. This product is suitable for fixing granite and other natural stones in window jambs and door frames due to its ability to withstand mechanical operations (which are carried out during fixing doors and windows). White colour adhesive adds to aesthetic look, especially for light colour stones.To know before applying

• Gradually add  2.5 parts of weberset plus-white (powder) to 1 part of clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer / low-speed drill mix / or any other appropriate tool.
• After mixing, allow the mixture to stand for 2 min for it to mature.

Features and benefits

• Ready to mix, single component product.
• Recommended for both internal & external surfaces for wall & floor in dry & wet areas.
• Especially suited for fixing low porosity tiles and stones of regular size.
• Suitable for fixing natural stones in window jambs and door entrances.
• Highly polymer-modified: Provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
• Excellent adhesion properties, no slip is observed on vertical applications in tiles and natural stones.
• Self-curing properties, which allows for hassle-free application, with minimum labour.
• No shrinkage prevents de-bonding and gives longer life to tiles and stones.
• Low VOC for healthy living.
• Prolonged and easy workability.
• The tiled floor can be made available for foot traffic after 24 hours.
• Can be used for new construction, as well as for renovation over existing floors/facades.
• No hacking of the substrate required to achieve the bonding.
• Useful for bed thickness of 3-12 mm, may go up to 15 mm in a limited extent.

Constraints

• Do not use on wet screed or plaster. The surface must be fully cured.
• Use on gypsum plaster or boards, fibre cement boards, or other drywall partitions, strictly in accordance with the tile substrate recommendation table.
• Can only be used on cementitious waterproofing. Do not use on epoxy or polyurethane waterproofing.
• Do not use for installing glass tiles or metal tiles. Use only weber bond poxy, for fixing glass and metal tiles.
• Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for a recommendation.
• Do not use on surfaces subjected to vibrations. For vibrations, use weberfix drywall for such areas.

Product Details:

Product Details 
weberfloor slurrybond is a highly polymer-modified, cementitious adhesive, that can be used in slurry form, on wet screed, for wet-on-wet fixing of tiles and stones, as well as an adhesive paste for fixing tiles and stones on floor and wall. In slurry form, it replaces the cement slurry which has been traditionally used for fixing floor tiles/stones. It also provides additional strength to the screed itself, and increase the tiling speed.

To know before applying

• Gradually add 6 parts Weberfloor slurrybond to 2 parts clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer or a low-speed drill mix. This paste can be used as tile adhesive.
• To make a slurry, add additional 3 parts water, and mix to form a smooth, lump-free slurry.
• After mixing allow the mixture to stand for 5 minutes for it to mature.
• NOTE: Do not add anything, like additional water, cement or sand, to the mix, as it may adversely effect the performance of the product.

Features and benefits

• 4 times more coverage than Cement slurry
• Free-flowing - no need for troweling
• Shrink resistant
• Provides additional strength to screed, as polymers travel to the screed while applied in the wet-on-wet condition
• Easy to use
• Highly polymer modified for high strength bonding.
• Dual-use: Can be used a slurry adhesive, or as a thin-set tile adhesive.
• Very high pot life ensures higher speed of tiling and no wastage.
• Water needs to be continuously added to cement slurry, which reduces strength. No such issues with weberfloor slurrybond.
• High Adjustability time. Cement slurry does not offer an adjustment time, and if the tile needs to be adjusted, the slurry needs to be replaced. Further reduces wastage. 

ConstraintsAs slurry 

• Not to be used on preset screed
• Not to be used on wooden, metal or glass substrates
• Only to be used for floor application

As thin-set adhesive :

• Can be used for internal as well as external, floor as well as wall application, in accordance with the Tile/substrate sheet.

Product Details:

Product Details
weberset premier is a polymer modified, thin-set tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical (wall) and horizontal (floor) application, over the cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application.To know before applying

• Gradually add 3 parts for weberset premier (powder) to 1 part of clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer / low-speed drill mix / or any other appropriate tool.
• After mixing, allow the mixture to stand for 2 min for it to mature.

Features and benefits

• Can be used in internal areas, for the floor as well as wall application.
• Low VOC - for healthy living.
• No hacking of the substrate required to achieve the required bonding.
• Self-curing properties, which allows for no-hassle application with minimum labour.
• The free-flowing product makes it easier to mix and apply.
• No-sag formula: provides for hassle-free application on vertical walls, without any slippage.
• Very low shrinkage prevents de-bonding and gives longer life to tiles.
• Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.

Constraints

• Do not use for large format tiles.
• Do not use for fixing vitrified tiles or stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and webertec crete for the same.
• Refer to the respective datasheets for details.

Product Details:

Product Details 
weberset nova is a high polymer modified thin-set tile and stone adhesive, which is especially formulated for fixing low porosity vitrified tiles on walls and floor, and natural stones on the floor. The adhesive can be used in internal as well as external conditions, in dry as well as wet areas.

To know before applying

• Gradually add Weberset nova (3 parts for white and 2.5 parts for grey) to 1 part of clean water (by volume) and mix it to a lump free, smooth, workable paste using a suitable stirrer / low speed drill mix / or any other appropriate tool.
• After mixing, allow the mixture to stand for 2 minutes for it to mature.

Features and benefits

• High Bond strength.
• Free-flowing product makes it easier to mix and apply-Easy to use.
• Useful for bed thickness of 3-12 mm. May go up to 15 mm in a limited extent.
• Thixotropic formula - no sag, for easy application on wall.
• Low VOC - For a healthy living.
• For installation of vitrified tiles on wall and floor and Natural stones on the floor.
• Suitable for internal and exterior use.
• Can be used for new construction, as well as for renovation over existing floors/facades.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No Hacking of substrate required to achieve the required bonding.

Constraints

• Do not use on wet screed. Surface must be fully cured.
• Do not use on gypsum plaster or boards, fibre cement boards, or other drywall partitions.
• Do not use for Installing Glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only Weber bond poxy, for fixing glass and metal tiles.
• Do not use for wooden flooring, or for insulating and soundproofing panels.
• Do not use on waterproofing coat, except if done with Webertec SBR or Webertec crete.
• Do not use for fixing artificial stone or impregnated stone. Use Weberset ultra for the same.