grouting of base plates of turbines, compressors, boiler feed pumps, bridge bearing pedastal applica
Packaging Size
30 Kg
Purity
100% pure
Features
Non Shrink, High Strength
Specific Gravity
2300 kg
Shelf Life
1 year
Storage Condition
Cool & Dry Place
Solubility
Water Soluble
Viscosity
High
Water Absorption
High
Working Time
20-25 minutes
Pot Life
20 minutes
Temperature
Room Temperature
Thickness
Refer Datasheet
Toxicity
Non Toxic
Technical Information
Refer Datasheet
Packaging Type
PP Bag
Surface Of Application
Concrete & Steel
Chemical
Grouting Chemical
Form Of Chemical
Powder
Country of Origin
Made in India
Here's a breakdown of the key information about Fosroc Conbextra GP2:
Uses: Precision grouting for equipment base plates (turbines, compressors, pumps), anchoring masts, bolts, and fence posts.
Properties:
High Strength: Develops high early strength and high ultimate strength.
Non-shrink: Gaseous expansion system compensates for shrinkage in the plastic state.
Free-flow: Ensures good contact with the load-bearing area.
No Metallic Iron Content: Prevents staining.
Pre-packed: Reduces on-site batching variations.
Composition: Blend of Portland cement, graded fillers, and chemical additives.
Compressive Strength: Exceeds 50 N/mm2 at 7 days and 60 N/mm2 at 28 days (for consistency Flowable, W/P 0.18).
Flexural Strength: Exceeds 9 N/mm2 at 28 days.
Fresh Wet Density: Approximately 2220kg/m3.
Time for Expansion: Starts 20 minutes after mixing, finishes after 120 minutes.
Safety Precautions: Conbextra GP2 is alkaline and should not come into contact with skin and eyes. Inhalation of dust during mixing should be avoided. Gloves, goggles, and a dust mask should be worn. It is non-flammable.
