Tile Adhesive & Grouts

It is a cementitious tile fixing adhesive for fixing ceramic tiles of regular size on walls and floors.

PRODUCT DESCRIPTION

Weber.set premier is a polymer modified cementitious tile adhesive for fixing ceramic tiles of regular size on wall and floor and porous natural stone on the floor. It can be used over cementitious & self-leveling screeds for internal application only.

KEY FEATURES

• It is a ready to use mix; a single component product
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for foot traffic after 24 hours.

RECOMMENDATION

It is recommended for application on cementitious substrates, self-leveling screeds and fibre cement boards.
Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks.
• Correct the local undulations/damages on the substrate at least 48 hours before the application of weber.set premier.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 3 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the paste to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set premier over the surface using the straight edge of the notched trowel and then comb the applied adhesive on the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of tile surface to avoid voids.
• Firmly press the tile into the adhesive to ensure good initial bonding.

CONSUMPTION

• For 3mm bed thickness the coverage will be 4-4.5 kg/sqm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• weber.set premier - 20 kg (retail pack)
• weber.set premier 30 - 30 kg (retail pack)
• weber.set basic - 30 kg (project pack)

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in a dry condition.

COLOUR

Grey

It is a grey adhesive for fixing moderate/low porosity tiles and tile-on-tile application for internal wall and floors.

PRODUCT DESCRIPTION

weber.set classic is a polymer modified cementitious tile adhesive for fixing ceramic tiles vitrified tiles and porous natural stones of regular size on wall and floor, over old tiles and other flooring material. It can be used over cementitious & self-leveling screeds for internal application only.

KEY FEATURES

• It is a ready to mix; a single component product.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for foot traffic after 24 hours.
• It can be conveniently used for tile on tile application as it does not involve removal of earlier mosaic tile hence no debris, no dust.
• For internal application

RECOMMENDATION

It is recommended for application on cementitious substrates, self-leveling screeds and fibre cement boards.
Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks.
• Correct the local undulations/damages at least 48 hours before the application of weber.set classic.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 3 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the paste to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set classic over the surface using the straight edge of the notched trowel and then comb the applied adhesive on the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the surface to evade voids.
• Firmly press the tile into the adhesive to ensure good initial bonding.

CONSUMPTION

• For 3mm bed thickness the coverage will be 4-4.5 kg/sqm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• weber.set classic - 20kg (retail pack)
• weber.set classic 30 - 30 Kg (retail pack)
• weber.set standard - 30 (project pack)

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in a dry condition.

COLOUR

Grey

It is a grey cementitious tile adhesive for fixing normal, medium and low porosity tiles on internal and external walls and floors.

PRODUCT DESCRIPTION

weber.set plus grey is a polymer modified cementitious tile adhesive used for fixing ceramic tiles, vitrified tiles and stone of regular size on wall and floor with regular traffic. It is applicable for both interior and exterior conditions.

KEY FEATURES

• It is a ready to mix; a single component product, just add water in the specified proportion and apply.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for foot traffic after 24 hours.
• It provides good water as well as heat resistance for external applications.

RECOMMENDATION

It is recommended for application on cementitious substrates, self-leveling screeds and fibre cement boards.
Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set plus-grey.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set plus-grey over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
• Firmly press the tile into the adhesive to ensure good initial bonding.

CONSUMPTION

• For a 3mm bed thickness the coverage will be 4 - 4.5 kg/sqm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• weber.set plus grey - 20 kgs
• weber.set nova grey - 30 kgs

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

COLOUR

Grey

Specially formulated adhesive for glass mosaic tiles, with the finest particle size, making swimming pools come alive.

PRODUCT DESCRIPTION

A flexible, cement-based polymer modified tile adhesive for internal and external use, especially for Glass Mosaic. It is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in dry or wet areas, including swimming pools. It is particularly suited for areas with some movement, deflection or limited shrinkage is likely. It has the finest particle size which makes it easily workable enhancing the colors of the glass mosaic tiles. Weber.set glass mosaic has extended open and adjustability times making installation easier with no sagging or slippage. Being a high strength, flexible tile adhesive it can be used for heavy duty applications on a variety of substrates.

KEY FEATURES

• Brightest white adhesive, enhances the color of glass mosaic.
• Free flowing powder, having long open time & prolonged workability when mixed as a paste makes it easy to install.
• No hacking required-having a high bonding strength it can be used to fix tiles & stones on various substrates.
• Being self-curing, it optimizes the usage of water and labor at the site
• Being water resistant, it can be used to fix various types of tiles including glass mosaics in swimming pools & other wet areas like showers, bathroom etc
• It can sustain heat ageing.
• It has no shrinkage and is particularly suited for situations where some movement, deflection or limited shrinkage is likely.
• Absorbs dynamic loads which make it suitable to use in swimming pools where the water pressure or load may vary in a filled swimming pool and an empty swimming pool
• Quick setting times which helps in faster construction.
• Can be used at depths up to 10 meters underwater which makes it particularly suitable for swimming pools.

AREA OF APPLICATION

Specially formulated for glass mosaics. Finds extensive use in swimming pools, kitchens, spas, saunas and bathrooms. It can be used on horizontal as well as vertical surfaces. Since it is especially made for the most non-porous tile surface, it also gives excellent results, when used with stones for horizontal application. It can be used on a variety of substrates, including Brick, Concrete, Sand cement rendering, Screed, Water proofing coat, existing tiles, cement plaster, cement backer board, cement terrazzo etc.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set glass mosaic.
• Saturate the surface well and remove excess water bringing the surface to a touch dry condition before application of the tile adhesive.

Mixing

• Gradually add 2.5 parts of powder to 1 part of clean water (by volume) and mix it to a lump free, smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

Product Application

• Apply the adhesive onto the substrate covering up to 1 sqm at a time (or no more than can be tiled within 20 minutes).
• Apply weber.set glass mosaic over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness.
• If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.

Installing the tiles

• Bed the tiles firmly into the adhesive with a slight sliding and/or twisting action, to ensure a good contact.
• It is good practice to lift an occasional tile after fixing, to verify that the required contact is being achieved.
• In wet areas, external areas and all floors, the final adhesive bed should be free from voids.
• Carefully clean off any excess adhesive from the tiles and joints with a damp sponge or cloth before it sets. Leave for at least 24 hours before grouting.
• It has to be kept longer than 24 hours at lower temperatures when tiling onto impervious or sealed surfaces. For swimming pools, leave at least 1 day before grouting and then a further 17 days before filling.

MIXING RATIO

• 2.5 parts weber.set
• glass mosaic with 1 part
• water by volume

GROUTING AND SEALING

Joints to be grouted after 24 hours of application of weber.set glass mosaic using weber.jointpoxy. It can also be grouted with weber.color dewdrop mixed with weber grout add.

CONSUMPTION

• 13 Sq.mtr / 30 Kg bag at 2mm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• 30 kgs

SHELF LIFE

12 months.

COLOUR

White

It is a cementitious white tile adhesive for fixing ceramic tiles, vitrified tiles, glass mosaic and natural stones on walls and floors.

PRODUCT DESCRIPTION

weber.set plus-white is a polymer modified cementitious white tile adhesive used for fixing ceramic tiles, vitrified tiles, glass mosaic and stones of regular size on walls and floors with regular traffic. It is specially recommended for glass mosaic and stones due to its white color which adds to the aesthetic look.

KEY FEATURES

• It is a ready to mix; a single component product.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for foot traffic after 24 hours.

RECOMMENDATION

It is recommended for application on cementitious substrates, self-leveling screeds, fibre cement boards and blocks. It is suitable under wet and dry conditions including swimming pools and fountains.
Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set plus-white.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set plus-white over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
• Firmly press the tile into the adhesive to ensure good adhesion.

CONSUMPTION

• For a 3mm bed thickness the coverage will be 4 - 4.5 kg/sqm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• weber.set plus-white - 20 kgs
• weber.set nova-white - 30 kgs

COLOUR

White

It is a cementitious white tile adhesive for fixing all types of tiles and natural stone like marble, granite on walls and floors.

PRODUCT DESCRIPTION

weber.set firm is a polymer modified cementitious tile adhesive used for fixing all types of tiles and natural stones like marble, granite on the wall and floor. It is also suitable for fixing any porosity tile over any cementitious substrate.

KEY FEATURES

• It is a ready to mix; a single component product.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for the foot traffic after 24 hours.
• It is recommended for windows and door frames.

RECOMMENDATION

• It is recommended for application on cementitious substrates, self-leveling screeds and fibre cement boards
• It can also be used for old tiles (porous and non-porous) on walls using weber.tec prime and renders for both interior and exterior surfaces.
• Can be used for wet and dry service condition including swimming pools.
• Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance if any using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set firm.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set firm over the surface using the straight edge of the notched trowel and then comb the applied adhesive on the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tiled surface to evade voids.
• Firmly press the tile into the adhesive to ensure good initial bonding.

CONSUMPTION

• For a 3mm bed thickness the coverage will be 4 - 4.5 kg/sqm
• Note: The coverage will vary depending on surface undulations

PACKAGING

• weber.set firm - 30 kgs

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

COLOUR

White

Specially formulated adhesive for glass mosaic tiles, with the finest particle size, making swimming pools come alive.

PRODUCT DESCRIPTION

weber.set flex is a high-performance polymer modified adhesive for fixing tiles and natural stones of large format on wall and floor where nominal substrate movement is expected.

KEY FEATURES

• It is a ready to mix; a single component product.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for the foot traffic after 24 hours.
• It is suitable for heavy duty applications with moderate structural movements.
• It is recommended for external cladding.

RECOMMENDATION

• It can be used for applications on cementitious substrate self-leveling screeds and blocks.
• It is suitable for fibre cement boards, gypsum boards and renders for both interiors and exterior surfaces.
• It can be effectively used on vinyl tiles, plywood, old tiles (porous and non-porous) and on a wooden floor using weber.tec prime.
• Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance if any using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption. For fresh plasters & screeds ensure complete curing as recommended.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set flex.
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add 3 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2 minutes for it to mature.

TILE FIXING

• Apply weber.set flex over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to avade voids.
• Firmly press the tile into the adhesive to ensure good adhesion.

CONSUMPTION

• Single spreading – 4 kg/sqm
• Double spreading – 6 kg/sqm
• Note- The coverage will vary depending on surface undulations.

PACKAGING

• weber.set flex - 30 kgs

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

COLOUR

White

It is a two-component high performance white tile adhesive for fixing impregnated stone, tile and large format tile and stone where nominal to moderate substrate movement is expected.

PRODUCT DESCRIPTION

weber.set ultra is a two-component high performance polymer modified adhesive for fixing impregnated stone, tile and large format tile and stone where nominal substrate movement is expected.

KEY FEATURES

• It is a ready to mix; two component products, where powder is added to a polymer liquid in a specified proportion to be applied.
• It has excellent adhesion properties; no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• It is suitable for heavy duty applications with moderate structural movements.
• It is recommended for external cladding.

RECOMMENDATION

• It can be used for applications on cementitious substrate self-leveling screeds and blocks.
• It is suitable for fibre cement boards, gypsum boards, old tiles (porous and non-porous) for both interior and exterior surfaces.
• It can be effectively used on vinyl tiles and on a wooden floor using weber.tec prime.
• Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

DIRECTION FOR USE

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance if any using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption. For fresh plasters & screeds ensure complete curing as recommended
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set ultra
• Saturate the surface well and remove excess water before application of the tile adhesive.

MIXING RATIO

• Gradually add weber.set ultra-component A powder to weber.set ultra-component B of polymer liquid and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 4 minutes for it to mature.

TILE FIXING

• Apply weber.set ultra over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to avade voids.
• Firmly press the tile into the adhesive to ensure good adhesion.

CONSUMPTION

• Single spreading – 4.5 kg/sqm
• Double spreading – 6 kg/sqm
• Note - The coverage will vary depending on surface undulations.

PACKAGING

• Component A - 16 kg powder + Component B - 5 L liquid

SHELF LIFE

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

COLOUR

White

Crack-resistant and waterproof tiling

Fixing all types of tiles on floors, ceramic and highly porous tiles on walls in new constructions. The polymer-modified cement-based construction adhesive needs to be mixed with water for installation of tiles on wall and floor. This ceramic tile adhesive is water resistant and does not allow cracking of tiles.

Features

• Ready-to-use ceramic wall tile adhesive. Needs no curing.
• Water resistant.
• Saves time and increases productivity.
• Excellent adhesion and low shrinkage.
• Accommodates thermal and physical movements.

Cementitious polymer-modified tile adhesive

Ideal for tile-on-tile application. Fixing all kinds of tiles on floor and vitrified, large format ceramic tiles on walls.
A blended polymer-modified cement-based powder tile adhesive. Roff Non-Skid Adhesive (NSA) forms a waterproof barrier between two surfaces and has excellent strength and bonding properties.

Features

• Ready-to-use. Needs only mixing with water.
• Excellent adhesion and low shrinkage.
• Accommodates physical and thermal movements.
• Suitable for indoor and outdoor tile-on-tile applications.

Cementitious polymer-modified tile adhesive

Fixing of marble slabs, glass mosaic, glass tiles on internal, external wall, floor surfaces and swimming pool.
A high-strength tile adhesive suitable for fixing marble and glass mosaic on internal and external surfaces. White in color, which makes it suitable for light-colored marbles, too.

Features

• Ready-to-use. Needs only mixing with water.
• Saves time, as floors are ready-to-be-used after 24 hours.
• Excellent adhesion and low shrinkage.
• Suitable for indoor, outdoor and tile-on-tile applications.
• Sufficiently flexible to accommodate physical and thermal movements.

Flexible additive for tile on wood

Ideal for fixing tiles and stones on plywood, wall and floor surfaces in dry and high vibration prone areas.
A flexible additive, when mixed with Roff Non-Skid Adhesive (NSA), it provides a strong bond with most surfaces and is ideal for fixing tiles on plywood. It is suitable for internal as well as external application. It is a non-hazardous and non-flammable liquid.

Features

• High bond strength.
• Suitable for vibration prone areas.
• Ideal for tile on wood and plywood application.

On-site mix for enhancing the strength and workability of cement

Ideal for fixing all types of tiles on conventional cement machan and levelling bed application. It is recommended for both horizontal and vertical, and wet areas.
On-site mix for improving the strength and workability of cement.

Features

• Exceptional bonding properties.
• Easy-to-use, and no special tools required.
• Economical solution for tile fixing.

High-quality cleaning and degreasing solution

Roff Cera Clean is a high-quality rapid active cleaner and degreasing solution that works effectively on tiles, bathtubs, wash basins, privy basins, concrete, etc. Whitish spots and layers, which are often seen under plastic and metal buckets placed in the bathroom, cannot be removed with normal detergent. Roff Cera Clean removes them easily. It can remove white/yellow spots and layers rapidly, as well as water stains over tiles, cement stains, grime, oil, paint stains, grease, moss and wax from concrete, asbestos, terrazzo and ceramics. It is ideal for cleaning the surface of floors in kitchens, bathrooms, garages, factories, general building sites, etc., where efficient cleaning is necessary. It is also an excellent solution for cleaning the surface before the application of epoxy products, and degreasing tiles in bathrooms, toilets, wash basins, etc.

Features

• Does not damage joints between ceramic tiles, even those grouted with colored products.
• Removes stains easily.
• Degreases the remains of soaps, scum, efflorescence and mineral deposits from the surface of tiles.
• Cleans ceramic, porcelain, and vitrified tile and grout.
• Retains the glaze of the tiles.

Product Code : 5675

Asian Paints SmartCare is an integral liquid waterproofing compound with advanced formulation and superior plasticizing additives for cement concrete, morter and plasters. The product is formulated with selected surface-active plasticizing agents, chemicals and additives which make the cement concrete / plaster mix cohesive and upon curing, reduces water permeability.

Product Code : 5427

Asian Paints SmartCare Glass Tile Adhesive is single component white cement-based polymer modified, fiber reinforced adhesive for fixing glass mosaic tiles in interiors as well as exteriors.

Product Code : 5425

Asian Paints SmartCare Tile Adhesive for Normal Application is a single component cement based polymer modified adhesive for fixing tiles on floors and walls in interiors as well as exteriors.

Product Code : 5426

Asian Paints SmartCare Tile Adhesive for Tile on Tile Application is a single component cement based polymer modified adhesive for fixing tiles over tiles on floors and walls in interiors as well as exteriors. The product contains special additives that provide excellent bonding and grabbing properties.

Product Code : 5639

Asian Paints SmartCare stone tile adhesive is single component cement based polymer modified tile adhesive specially designed for heavy stone tile application like granite, marble on internal as well as external vertical surfaces. SmartCare stone tile adhesive is also suitable for fixing natural stones, ceramic on new substrate.

Product Code : 5669

Asian Paints SmartCare Tile Bonder is a free flowing powder which can use as an additive for cement paste. It should be well suited for conventional manchan / leveling bed application.

Product Code : 5429

Asian Paints SmartCare Tile Grout – Cement Based is a single component polymer modified tile grout for filling the joints up to 5 mm width. It is specially formulated premium, fast setting, low shrinkage grout that prevents ingress of water through the joint.

Product Code : 5430

Asian Paints SmartCare Tile Grout – Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.